See Solving Problems for more information.
Setting the Maximum Resolution
To set the Maximum resolution for the monitor:
1. Right-click on the desktop and select Properties.
2. Select the Settings tab.
3. Set the screen resolution to 1440 x 900 (for IN1720) or 1366 x 768 (for IN1920).
4. Click OK.
If you do not see 1440 x 900 (for IN1720 only) or 1366 x 768 (for IN1920 only) as an option, you may need to update your graphics card driver. Depending on
your computer, complete one of the following procedures:
lIf you have a Dell desktop or portable computer:
¡Go to support.dell.com, enter your service tag, and download the latest driver for your graphics card.
lIf you are using a non-Dell computer (portable or desktop):
¡Go to the support site for your computer and download the latest graphic drivers.
¡Go to your graphics card website and download the latest graphic drivers.
Using the Dell Soundbar (for IN1920 only)
This means that the monitor cannot synchronize with the signal that it is receiving from the computer. See Monitor Specifications for the
horizontalandverticalfrequencyrangesaddressablebythismonitor.Recommendedmodeis1440 x 900 (for IN1720) or 1366 x 768 (for
IN1920).
YouwillseethefollowingmessagebeforetheDDC/CIfunctionisdisabled.
WhenthemonitorentersthePowerSavemode,thefollowingmessageappears:
Activate the computer and wake up the monitor to gain access to the OSD

If you press any button other than the power button the following messages will appear depending on the selected input:

If VGA cable is not connected, a floating dialog box as shown below appears.