30
Watching TV

Password setting for the child lock (for TV

input mode)

Allows you to use a password to protect certain
settings from being accidentally changed.
Setting a password
Register a 4-digit password number to use the Child
Lock function.
1Press MENU and the MENU screen displays.
2Press c/d to select “Setup”.
3Press a/b to select “Child lock”, and then
press ENTER.
4If you have already set the password, enter it
here.
5Press a/b to select “Change password”, and
then press ENTER.
Change password
Clear password
Parental rating
New password
Reconfirm
Change password
6Enter the 4-digit number as a password using
0 – 9.
Change password
Clear password
Parental rating
New password
Reconfirm
Enter your new password. Use 4 digits.
7Enter the same 4-digit number as in step 6 to
confirm.
• “The new password was registered” displays.
NOTE
• To view a locked channel (Lock setting in Programme setup
“Manual adjust” is set to “On”), you must enter a password.
(See page 26.) When you select a locked channel, a
password prompt message pops up. Press RETURN to
display the password input window.
Clearing the password
Allows you to clear your password.
1Repeat steps 1 to 3 in Setting a password.
2Enter the password.
3Press a/b to select “Clear password”, and
then press ENTER.
4Press c/d to select “Yes”, and then press
ENTER.
Clear password
Parental rating
Change password
Yes No
Clear password
NOTE
As a precautionary measure, make a note of your
password and keep it in a familiar place. If you lose
or forget your password, initialise the TV to return all
settings except for the TV channel settings to factory
preset values. (See page 96.)
• This function is only available for TV input mode.
• To relock a channel which has been temporarily unlocked
by inputting the correct password, turn power off and then
on again.
LC46LB700X_EN.indb 30LC46LB700X_EN.indb 30 12/17/2009 10:14:35 AM12/17/2009 10:14:35 AM