Sharp LC-46LB700X Other picture settings, Range of OPC, Adjusting the image position

Watching TV

Other picture settings

H Range of OPC

The brightness level range of the OPC sensor’s automatic adjustments can be set according to your preferences. The adjustment range of the OPC sensor can be set to a maximum of +16 and a minimum of -16.

Selected item	Description
Max.	-15 through +16
Min.	-16 through +15

NOTE

•This function is available only when the OPC setting is set to On or On: Display.

•The maximum setting cannot be set to a smaller number than the minimum setting.

•The minimum setting cannot be set to a bigger number than the maximum setting.

•The maximum and minimum settings cannot be set to the same number.

•Depending on the brightness of the surrounding light, the OPC sensor might not operate if the adjustment range is small.

Adjusting the image position

For adjusting a picture’s horizontal and vertical position.

1Press MENU and the MENU screen displays.

2Press c/d to select “Setup”.

3Press a/b to select “Position”, and then press ENTER.

4Press a/b to select “H-pos.” or “V-pos.”.

			Display position adjustment
H-pos.	[	0]	-	+	H-pos. adjustment
V-pos.	[	0]	-	+	V-pos. adjustment
					Return to factory pre-settings
Reset

Selected item	Description
H-pos.	Centres the image by moving it to the left
	or right.
V-pos.	Centres the image by moving it up or
	down.

5Press c/d to adjust the item to your desired position.

NOTE

•For resetting all adjustment items to the factory preset values, press a/b to select “Reset”, and then press ENTER.

•Adjustments are stored separately according to input source.

•Depending on the input signal type or “WIDE MODE” setting, a position setting may not be available.

Game play time

This function displays the elapsed game time so you do not lose track of the time.

To display the elapsed time, select “GAME” under “AV MODE” for the input mode of the terminal connected to the game console before starting the game.

1

2

Press MENU and the MENU screen displays.

Press c/d to select “Option”.

3	Press a/b to select “Game play time”, and
	then press ENTER.
4	Press c/d to select “On”, and then press
	ENTER.
Selected item		Description
On		The elapsed time is displayed every 30
		minutes when you switch to GAME mode
		in external input mode.
Off		No adjustment

38