Sharp LC-46LB700X Preparation, Attaching the stand, Confi rm the 8 screws supplied with the TV

Preparation

Attaching the stand

•Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.

•Before performing work, spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.

CAUTION

•Attach the stand in the correct direction.

•Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.

1Confi rm the 8 screws supplied with the TV.

Short screws (g 4)	Long screws (g 4)
(used in step 3)	(used in step 2)

2Attach the supporting post for the stand unit onto the base as shown below.

Long screw

Screw driver (not supplied)

31 Insert the stand into the openings on the bottom of the TV.

2 Insert and tighten the 4 short screws into the 4 holes on the rear of the TV.

Screw driver (not supplied)

Short screw

1

1

NOTE

• To detach the stand, perform the steps in reverse order.

7