Back to Contents Page
Setting Up the Monitor
Dell™IN1720/IN1920 Flat Panel Monitor User's Guide
Attaching the Stand
Connecting Your Monitor
Removing the Stand Base
Attaching the Dell Soundbar (Optional)
Removing the Stand for VESA wall mount

Attaching the Stand

Connecting Your Monitor

To connect your monitor to the computer:
1. Turnoffyourcomputeranddisconnectthepowercable.
2. Connectthebluedisplayconnectorcabletothecorrespondingvideoportonthebackofyourcomputer.

Connecting the Blue VGA Cable

NOTE: The stand base is detached when the monitor is shipped from the factory.
To attach the monitor stand body to the stand base:
1.
Place the monitor stand base on a stable table top.
2.
Slide the monitor stand body in the correct direction down onto the stand base until it clicks into place.
CAUTION: Before you begin any of the procedures in this section, follow the Safety Instructions.