Setup

Mounting

Orientation

Rigging

Procedure

Before mounting this fixture, read and follow the safety recommendations indicated in the Safety Notes section (page 2 of this manual).

Always mount this fixture in any safe position while making sure that there is adequate room around it for ventilation, configuration, and maintenance.

CHAUVET® recommends following the general guidelines below when mounting the Q- Beam 260-LED.

When selecting an installation location, consider ease of access to the fixture for operation, programming adjustments, and routine maintenance.

Make sure to mount this fixture away from any flammable material as indicated in the Safety Notes section.

Never mount the fixture in places where rain, high humidity, extreme temperature changes, or restricted ventilation may affect it.

If hanging this fixture, make sure that the location where you are mounting the fixture can support its weight. Please see the Technical Specifications section of this manual for the weight requirement of this fixture.

The Q-Beam 260-LED comes with two omega brackets to which you can attach a couple of “C” or “O” clamps. You must supply your own “C” or “O” clamps and make sure that they are capable of supporting the weight of this fixture. You will have to use two mounting points per fixture. In addition, you may mount this product on the floor or a platform provided it is stable and it can support the weight of the fixtures on it.

C Clamps (not included)

Safety cable (included)

Omega brackets (included)

Product Mounting

Diagram

Overhead Mounting

Floor Mounting

Q-Beam 260-LED User Manual Rev. 01d

-9-

Page 13
Image 13
Chauvet 260 LED user manual Mounting, Orientation Rigging