Toshiba Satellite, M40 manual Removing the Display Assembly

4 Replacement Procedures 4.8 ODD Bay Module

4.9Display Assembly

Removing the Display Assembly

CAUTION: Use care to avoid that the antenna cable for antenna is caught between the display assembly and computer.

Remove the display assembly according to the following procedures and Figures 4-27, 4-28.

1.Turn the computer back to front and remove four M2.5x8 black flat-head screws.

2.Restore the normal computer placement and open the display panel.

Figure 4-27 Removing the screws from the back of the compute

3.Disconnect the LCD/FL cable from CN1on the system board.

4.Remove two M2.5x5 black flat-head screws to secure the LCD module to top cover.

5.Remove the wireless antenna cables from the top cover.

6.Remove the display module.

4-40 Satellite M40/M45, TECRA A4, dynabook Vx/4 Maintenance Manual