3 Diagnostic Programs

3.2 Quick Start

The attributes that have been modified would be marked in red; otherwise in yellow. User could press F2 to save the changes, or press F4 to ignore and exit the current program.

3.2.9System Information

This function is used to read the system information. When the test is completed, a file named System.log will be saved in the defined location. During the reading process, the following screen will be displayed to indicate that the progress is in detection:

On the left column of the above screen, the detected hardware components are listed. The corresponding information of the detected hardware components is displayed on the right of the screen. It displays the current running status information of the check program.

10 Satellite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance Manual

Page 84
Image 84
Toshiba M40, Satellite manual System Information