Toshiba M40, Satellite manual Disassembling the ODD Drive, Assembling the ODD Drive

4.9 Display Assembly 4 Replacement Procedures

Disassembling the ODD Drive

NOTE: Do not disassemble the ODD drive when it is working normally. Disassemble or replace the ODD drive only if it failed.

Disassemble the ODD drive according to the following procedures and Figures 4-26.

1.Remove the two M2x3 white flat-head screws.

2.Remove the bracket.

ODD bay module

Breaket

M2x3

white flat-head screw

Figure 4-26 Removing the bracket from the ODD drive

Assembling the ODD Drive

Assemble the ODD drive according to the following procedures and Figures 4-26.

1. Secure the bracket with the two M2x3 white flat-head screws.

Satellite M40/M45, TECRA A4, dynabook Vx/4 Maintenance Manual 4-39