Toshiba M40, Satellite Display Assembly Replacement Procedures, Removing the ODD Bay Module

4.9 Display Assembly 4 Replacement Procedures

4.8ODD Bay Module

Removing the ODD Bay Module

NOTE: The installation and removal procedures are the same for all the modules that can be installed in the ODD bays. See the appropriate sections for the disassembly procedures of the specific modules.

Remove the ODD bay module according to the following procedures and Figure 4-24, 4-25.

1.Turn the computer upside down.

2.Remove the M2x4 black flat-head screw.

3.Turn the computer over and open the display.

4.Push out the ODD bay module in the direction of the arrow.

CAUTION: Handle the ODD bay module carefully, because it becomes hot during

operation.

Figure 4-24 Removing the ODD bay module

Satellite M40/M45, TECRA A4, dynabook Vx/4 Maintenance Manual 4-37