Installation | TANDBERG Videoconferencing System |
|
|
Unpacking the Base
Due to the weight of the system, the base should be placed in its permanent location as soon as it is unpacked.
NOTE
IF THE SYSTEM IS TO BE PLACED AGAINST A WALL, IT IS POSSIBLE TO REDUCE THE SIZE OF THE BOTTOM PLATE. THE REDUCTION SHOULD BE DONE BEFORE THE REST OF THE INSTALLATION IS CARRIED OUT.
Unpacking and Installing the Monitor Rack
Lift the Monitor Rack out of the box. Do not remove the straps or packaging that are around the rack. Place the rack on top of the base. Make sure that the cables from the base do not get stuck in between.
You will find 4 bolts sticking out at the rear end of the base. Use the 4 nuts to fasten the Monitor Rack in place. You can now remove the straps and packaging from the Monitor Rack.
NOTE
THE FRONT COVER IS MADE WITH PLASTIC AND SHOULD BE TREATED WITH CARE.
Carefully flip down the plastic cover. 4
14
