Tandberg Data 7000 manual Terminal Settings, Network Configuration

TANDBERG Videoconferencing System Advanced use

Terminal Settings

This menu provides basic network setup for the unit and should be used when installing the system.

Network Configuration

Before using the system it is necessary to specify which network to use and define its settings.

If you want to use your system via ISDN-BRI you should select ‘Current Network: ISDN-BRI’ and enter the ‘ISDN-BRI Settings’ menu to set the BRI parameters.

If you want to use your system via ISDN-PRI you should select ‘Current Network: ISDN-PRI’ and enter the ‘ISDN-PRI Settings’ menu to set the PRI parameters.

If you want to use special networks and connect using RS449, V.35, X.21 or connect to ISDN via an external IMUX you should select ‘Current Network: External’ and enter the ‘External Network Settings’ menu to set the External Network parameters.

69