Tandberg Data 7000 manual Encryption, Max Call Length, Network Profiles

Advanced use TANDBERG Videoconferencing System

Encryption

Auto The system will try to make ISDN point-to-point calls using encryption. If the far end system supports encryption, the call will be encrypted. If not, the call will proceed without encryption.

If the far end supports encryption, the systems will initiate encryption after the call is connected. This takes approximately 10 seconds, during which an ‘open padlock’ will be displayed. When encryption has been established, a ‘closed padlock’ symbol will be displayed.

Off The system will not send or receive encrypted data.

Technical encryption information like encryption algorithm and encryption check code can be found in the ‘Call Status’ menu.

Max Call Length

This feature will automatically end both incoming and outgoing calls when the call time exceeds the ‘Max Call Length’ specified.

Max Call Length can have the following values: 0-999(minutes), where 0 is Off.

A few minutes before the specified time is reached, a Quick-Key menu will appear. Users will be asked if he/ she wants to extend the ‘Max Call Length’ that is specified:

Network Profiles

This menu defines the settings listed when pressing the Quick key ‘Net:’ while in the dial menu.

90