Tandberg Data 7000 manual VGA Settings

TANDBERG Videoconferencing System Advanced use

VGA Settings

NOTE

IF YOU SET ‘VGA OUT’ TO ‘MAIN’, MAKE SURE YOU HAVE A VGA-MONITOR CONNECTED TO THE VGA-OUTPUT ON THE SYSTEM. IF YOU NOT HAVE A VGA-MONITOR CONNECTED, YOU WILL NOT BE ABLE TO SEE THE MENU SYSTEM!

NOTE

ICIF WILL NOT BE AVAILABLE WHEN VGAOUT IS MAIN OR DUAL.

VGA Out

To enhance the local video quality, a VGA monitor may be connected.

Main: Should be used if you want to use a VGA monitor as your main monitor. Video outputs 1&3 will be disabled.

Dual: Should be used if you want to use a VGA monitor as your dual monitor. Video outputs 2&4 will be disabled.

Loop: ‘VGA Out’ will display whatever is present on ‘VGA In’. All video outputs will be enabled. The VGA monitor will act as a third monitor.

VGA Out Quality

VGA Out Quality changes the resolution of the VGA signal available on the ‘VGA Out’ connector at the rear of the codec.

67