Tandberg Data Telesync Features in the Tandberg 7000 Flat Panel Television User Manual

TANDBERG Videoconferencing System General use

Presets

The preset buttons enable you to pre-store up to ten different settings. Each preset is able to store:

•Video source

•Camera position, pan/tilt/zoom/focus/brightness (if Main Camera)

•Audio source selection (see ‘Audio Settings’ in ‘Advanced use’)

Selecting presets

P1	P2	P3	To select a pre-stored camera position, audio and video source, use the keys P1 P2 P3 or
			press P until the on-screen indicator ‘Preset 0-9’appears and use 0-9 to activate P0-P9

presets. To exit ‘Preset’ mode, press OK.

P1-P3 are the same presets as when pressing P and then a number key 1-3.

Storing presets

To store the current camera position, audio and video source:

store • Press STORE once and wait for the on-screen indicator to appear.

• Then press one of the keys P1 P2 P3 or a number key 0-9.

35