IP Settings | Tandberg Data 7000 specification

TANDBERG Videoconferencing System

Advanced use

IP Settings

NOTE

CHANGES IN THIS MENU WILL NOT HAVE

ANY EFFECT BEFORE THE SYSTEM IS RESTARTED.

IP-assignment

DHCP (Dynamic Host Configuration Protocol) can be selected when a DHCP server is present.

DHCP: IP-address, IP-subnet mask and Gateway are not used because these parameters are assigned by the DHCP server.

Static: The codec’s IP-address and IP-subnet mask must be specified in the IP-address field.

IP-address

IP-address defines the network address of the codec. This address is only used in static mode. In DHCP-mode, the assigned IP-address can be found on the Welcome Menu.

IP-subnet mask

IP-subnet mask defines the type of network. This address is only used in static mode. Your LAN-administrator will provide the correct value for this field.

Gateway

When using DHCP, the default gateway will be set automatically. If the LAN utilizes static IP addresses, IP address, subnet mask, and default gateway must be specified by the LAN administrator.

87

Image 87

Tandberg Data 7000 manual IP Settings

Contents

UserManual Plasma Monitors Trademarks and copyright Environmental Issues Operator Safety Summary Contents Advanced use Peripheral EquipmentAppendices 108 Index 116 TIP Introduction LAN Menu structure At a glance the Tandberg 7000 system Tandberg 7000 Videoconferencing System V.E. Camera MonitorsCodec Remote control Tandberg Natural Audio module Table microphone Installation PrecautionsUnpacking Unpacking the Base Unpacking and Installing the Monitor Rack Installing Installing the monitorsInstalling the camera Connecting cables Attaching the back covers Monitor configurationLAN cable Securing the cables Menu System configuration Isdn configuration LAN configuration Getting started System start-upWelcome menu Basics Making a call Making and ending calls TIP Selecting / setting default quality bandwidth Selecting / setting default network Answer a call End a callCorrecting keying mistakes Press D Irectory to bring up the following menu Directory Add New Entry Edit EntryDelete Entry Add Site Add MultiSite Entry Microphone on/off Adjusting volumeGeneral use View outgoing video selfview Do Not Disturb / Sleep Mode Moving / zooming camera Focusing cameraControlling the Main Camera Selecting video sources Voice Activated Camera Positioning Presets Selecting presetsStoring presets Main cam Aux Doc cam Vcr Far end camera control Fecc Receiving a still image Sending/receiving still imagesSending a still image Viewing a still image Add Duo Video Duo Video End a Duo Video call MultiSite MCU MultiSite cascading Establishing MultiSite meetings using Directory Press C Onnect Adding an extra site dial out Adding an extra site dial Disconnecting sites from a conference PC SoftPresenter PC Presenter Text Chat / Closed Captioning Web-interface Streaming Main menu Advanced use Video VGA ResolutionsCall quality Audio 4CIF Advanced call quality Duo Video Quality Presentation ModeDuo Video Mode Presentations Still image filter Duo Video NumberDuo Video / Still Image source Auto-display still image Dual Monitor UtilitiesAutoanswer Far end camera control MCU status line Auto-PIPWelcome Menu Continuous Presence MCU services Quick Menu View site # Request floorRelease floor Terminal Names Chair control Audio Inputs Audio SettingsPage Audio Outputs Echo Control Page Automatic Gain Control AGC Settings Restore Audio Defaults Alert Tones & Volume Video Settings Camera Tracking ModeDocument Camera Video Name FocusBrightness Whitebalance VGA Settings VNC Settings Network Configuration Terminal SettingsPage Core ISDN-BRI Settings Isdn BRI This Service has Limited Access on Some Isdn Networks Parallel dial ISDN-PRI Settings Channels automatically Page PRISM1, PRISMII, Wats Leased E1/T1 Settings External network settings 35/RS-366 cable LAN Settings Page Settings Rsvp Advanced H.323 Settings NAT IP Settings Snmp Settings Incoming telephone calls Call SettingsAccess Code Incoming MCU calls Encryption Max Call LengthNetwork Profiles Dataport configuration Page Software Options Language Diagnostics System infoChannel status TIP Call status Restore defaults Test subsystem View current settings Interfaces Peripheral EquipmentPage Dual Monitor Document camera Multiple controllable cameras Tracker AudioScience microphone Video Cassette Recorder VCR VCR PlaybackVCR Recording Extra fixed cameras Telephone Add-On PC applications Additional microphones Appendices Using Telesync TS-256 SW56/ISDN adapter Appendix 2 Connecting the system to the Switched 56 network Using CSU adapter Appendix 3 Connecting the system to PRI/T1 Background Loudspeaker volumeAppendix 4 Environmental considerations Iris control and lighting How to prepare a typical room for videoconferencing Guidelines for setting up videoconferencing rooms Appendix 5 Using the file system ABC Appendix 6 Access Code Appendix 7 Declaration of Conformity Index Tandberg Videoconferencing System Index To use the dataport for PC applications