Panasonic CY-RC50KU Troubleshooting, Problem Possible cause Possible solution

Troubleshooting

If you suspect something wrong

Check and take steps as described below.

If the described suggestions do not solve the problem, it is recommended to take the unit to your nearest authorized Panasonic Servicenter. The product should be serviced only by qualified personnel. Please refer checking and repair to professionals.

Panasonic shall not be liable for any accidents arising out of neglect of checking the unit or your own repair after your checking.

Never take measures especially those other than indicated by italic letters in “Possible solution” described below because those are too dangerous for users to handle themselves.

Warning

ODo not use the unit in an irregular condition, for example, without sound, or with smoke or a foul smell, which can cause ignition or electric shock. Immediately stop using the unit and consult your dealer.

ONever try to repair the unit by yourself because it is dangerous to do so.

Problem

Possible cause ° Possible solution

	O Incorrect settings or connection.
No image from the		°Check settings and cord connections.
	O	The fuse for the system, or for equipment connected to it, has
camera.
		blown.
		°Consult a Panasonic Servicenter.
Image is unclear.	O	Is there dust or dirt on the camera?
		°Wipe the lens clean.

OIf the camera is viewing the sun directly, or a strong light

White lines (vertical (reflection from a fender, a headlight beam etc.) shines into it,

lines of light) on the bright vertical lines can appear above and below the light source.

screen.	(Smearing)
	°This is not a breakdown.
O	When the area viewed by the camera is lit by fluorescent light or
Noise on the	a similar light source, noise can appear on the screen. (Flickering)
screen.
	°This is not a breakdown.
O The screen display may become hard to see when it shows a
Screen display is	dark area, or an image that is bright in a small area, or when the
hard to see.	camera is hot.
	°This is not a breakdown.