Sedan type
Cord clamp | Trunk lid |
Rear view camera
Rubber gasket
View with trunk lid closed
Rubber water seal
(Attached to rear view camera.)
Rubber water seal
(Attached to rear view camera.)
Rubber gasket
Attach the rubber water seal so that it is parallel with the rubber gasket when the trunk is closed.
Note:
OOpen and close the back door or trunk lid slowly to check that the camera cord is not pinched or abraded by the door/lid. Moisture or water can enter through the damaged area of the cord and penetrate to the interior of the camera, causing breakdowns.
ORoute the camera cord as far as possible from the antenna cord. (It could cause noise in TV and radio signals.)
OIf AM radio broadcasts are affected by noise, move the camera cord further from the vehicle wiring harness.
