Caution

Observe the following cautions when using this unit.

R Do not use this system for any purpose other than mounting on a road vehicle. Non-vehicular use (such as use outdoors

or on a pleasure boat) could cause smoking generation, ignition, electric shock, injury and breakdown.

R Do not use an automatic car–washing machine to wash the vehicle.

Exposure to water from a high pressure hose or impact from a brush may cause the system to fall resulting in accident or injury. Water entering inside the camera can result in a fire, electric shock or breakdown.

Observe the following cautions when installing.

R Do not damage cords.

Do not damage, pull, bend, twist or modify cords, place heavy objects on them, or place them near hot equipment or in contact with hot parts of the vehicle. Breaking or shorting cords could cause fire, electric shock, or accidents.

ORoute cords so that they cannot be pinched by the body of the vehicle, screws or moving parts (seat rails etc.).

ODo not press cords with the point of a screwdriver or similar implement.

R Do not damage the rear view camera cord.

Water and moisture can move along the cord from the damaged area and enter the camera, causing fire, electric shock and breakdown.

R Route the rear view camera cord inside the vehicle, so that water cannot penetrate them.

If water enters the vehicle during rain or car washing, it could cause fire or electric shock.

R Order wiring, mounting and dismounting work from a specialist engineer.

Wiring, mounting and dismounting work requires specialist skills and experience. For safety, ask your dealer to perform such work. In the case that this system is installed in a vehicle with a drive computer or a navigation system, improper removal of the battery may result in erasure of system’s memory.

R Only use the accessories provided and the parts specified.

Use of non-specified parts can cause internal damage to the equipment, and insecure mounting could allow it to fall off, causing accident, breakdown and fire.

R Mount the equipment securely, so that it cannot come off and fall.

Wipe the mounting area clean of dirt, wax etc., then fasten the camera securely in place. Re-affixing adhesive parts or use of general- purpose double-sided tape could cause weak bonding that would allow the equipment to drop off while the vehicle is in motion, causing accident or injury. Check the state of bonding or mounting (loose screws etc.) occasionally.

Page 3
Image 3
Panasonic CY-RC50KU operating instructions Observe the following cautions when using this unit, Do not damage cords