Mounting procedure
Rear view camera
Before mounting Wipe away all oil and dirt etc. from the mounting surface.
Make connections and placement tentatively at first, to check positions. Repeated affixing weakens the adhesive.
OThe screw holes to use, and the possible angle adjustment, vary according to the mounting position. Adjust the angle and check that the required field of view is visible. (It is not possible to
OMount the camera so that it does not contact the vehicle body or rear wipers.
QFor secure mounting
ODo not work outdoors in rainy weather.
OWhen the air temperature is low, use the vehicle’s interior heater or defogger, or a dryer, to warm the bonding area.
OUse a dryer etc. to thoroughly remove all moisture. Dirt and moisture on the bonding surface reduce bond strength and could cause the camera to fall off.
OAfter mounting the camera, do not expose it to rain or other water, pull it or subject it to strong forces for 24 hours.
Note:
OThe camera cannot be affixed to painted or glass surfaces which have been treated with fluoroplastics (treatments which shed water droplets, mud etc.), or to
