Invacare SP Safety Inspection/Troubleshooting, Possible Solution, Symptom, Probable Cause, Number

SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING

Service Indicator Light Diagnostics

NUMBER	ERROR CODE
OF		POSSIBLE SOLUTION
	DESCRIPTION
FLASHES
1	User Fault	Release joystick to neutral and try again.
2	Battery Fault	Charge the batteries. Refer to Charging Batteries on page 62.
		Check that battery cables are connected properly. If necessary,
		replace batteries. Refer to Replacing Batteries on page 55.
3	Left Motor Fault	Contact Invacare/Dealer for service.
4	Right Motor Fault	Contact Invacare/Dealer for service.
5	Left Park Brake Fault	Contact Invacare/Dealer for service.
6	Right Park Brake Fault	Contact Invacare/Dealer for service.
7	Remote Fault	Check to make sure joystick is connected properly.
		Contact Invacare/Dealer for service.
8	Controller Fault	Contact Invacare/Dealer for service.
9	Communications Fault	Contact Invacare/Dealer for service.
10	General Fault	Contact Invacare/Dealer for service.
11	Incompatible or incorrect	Wrong type of remote connected. Contact Invacare/Dealer
	Remote	for service.

MPJ™+, PSR+, PSF+ Joysticks or Displays

SYMPTOM	PROBABLE CAUSE	SOLUTIONS
SPM L Park Brake Fault or	Motor lock levers disengaged	Engage motor lock levers. Refer to
SPM R Park Brake Fault displays	(Error code E9 or E10).	Disengaging/Engaging Motor Lock
		Levers on page 48.
and wheelchair does not drive.
CHARGER PLUGGED IN displays.	Battery charger connected	Unplug battery charger from the
	(Error code E28).	wheelchair. Refer to Charging Batteries
		on page 62.
SPM Battery Fault displays and the	Batteries need to be charged	Charge batteries. Refer to Charging
wheelchair does not drive.	(Error code E14).	Batteries on page 62. If batteries fail to
		charge properly, check battery charger
		or replace batteries. Refer to Replacing
		Batteries on page 55.
JOYSTICK TIMEOUT displays and	Joystick or input device is	Turn off power, reconnect the joystick
the wheelchair does not drive.	disconnected (Error code 32).	of input device and turn power on.
JS REV TOO LARGE	The joystick or input device is	Replace joystick or input device.
JS FWD TOO LARGE	sending a value outside of the
	reverse, forward, left or right
JS LFT TOO LARGE or
	limits (Error codes E01, E02,
JS RGT TOO LARGE	E03 or E04).
displays and the wheelchair does not
drive.

TDX™ SP 32 Part No 1143190