SECTION 10—BATTERIES

NOTE: If charging instructions are not supplied, consult a qualified service technician for proper procedures.

Required Items:

 

 

 

 

 

TOOL

QUANTITY

COMMENTS

Battery Charger

1

Supplied

 

 

 

Extension Cord

1

Not Supplied

 

 

 

1.Attach the battery charger connector to the charger port on the joystick.

2.Plug the charger’s AC power cord, or extension, into the grounded 120 VAC wall outlet.

3.Wait until charging is complete.

NOTE: Allow eight hours for normal charging. Larger batteries (greater than 55 ampere‐hours) or severely discharged batteries may require up to sixteen hours to be properly charged and equalized.

NOTE: It is advantageous to recharge frequently rather than only when necessary. In fact, a battery’s life is extended if the charge level is maintained well above a low condition.

NOTE: If the batteries need to be charged more often or take longer to charge than normal, they may need to be replaced. Contact an Invacare dealer for service.

SPJ+, SPJ+ w/PSS and SPJ+ w/ACC

Joysticks

Charger/

Programming

Port

MPJ+ Joystick

Charger/Programming Port

(On Front of Joystick)

FIGURE 10.7 Charging Batteries

Part No 1143190

63

TDX™ SP

Page 63
Image 63
Invacare SP manual Required Items, Tool Quantity