Invacare SP manual On/Off Button, Speedometer, NOTE For the following information, refer to FIGURE

SECTION 5—WHEELCHAIR OPERATION

SPJ+, MK6i™ SPJ+ w/PSS and MK6i SPJ+ w/ACC Joystick Switches and Indicators

NOTE: For the following information, refer to FIGURE 5.3.

		Joystick
	Information
	Gauge Display
On/Off	Mode Button*
Button
Decrease	Speedometer	Not
Speed Button
(Tortoise)	Increase	Active
	Speed Button	Additional Input
GREEN	(Hare)
		for Powered
LED
		Seating Switch

Service Indicator

*NOTE: The mode button is only present on SPJ+ w/ACC joystick.

DETAIL “A” -

FRONT VIEW

Charger/

Programming

Input

FIGURE 5.3 SPJ+, MK6i™ SPJ+ w/PSS and MK6i SPJ+ w/ACC Joystick Switches and Indicators

On/Off Button

This button is located at the front of the joystick housing. It is used to turn the wheelchair On and Off, to remove the joystick from sleep mode (if programmed) and to lock or unlock the joystick (if programmed).

Speedometer

The speedometer is used to show the maximum speed. The right‐most LED indicates current maximum speed setting. The bottom left GREEN LED flashes to indicate that the joystick is in speed limit mode. Speed limit mode limits the drive speed to a pre‐ programmed value, typically when the seat has been elevated and the wheelchair is required to drive at 20% speed.

Part No 1143190 37 TDX™ SP