Invacare SP manual Reaching, Bending - Backward, Pinch Points, NOTE For this procedure, refer to

SECTION 3—SAFETY/HANDLING OF WHEELCHAIRS

Reaching, Bending - Backward

WARNING

DO NOT lean over the top of the back upholstery. This will change your center of gravity and may cause you to tip over.

NOTE: For this procedure, refer to

FIGURE 3.3.

Position wheelchair as close as possible to the desired object. Position the casters so that they are extended away from the drive wheels to create the longest possible

wheelbase. Reach back only as far as your FIGURE 3.3 Reaching, Bending - Backward arm will extend without changing your

sitting position.

Pinch Points

WARNING

A pinch point exists between head tube cap and walking beam (Detail “A”).

A pinch point exists between walking beam/head tube cap and telescoping tube when TDX SP is at the lowest seat to floor height (Detail “B”).

Pinch point may occur when rotating the footboard assembly (Detail “C”).

NOTE: For this procedure, refer to FIGURE 3.4.

	DETAIL “A”
	Telescoping
	Tube
	Pinch Point
Walking	Headtube
Beam
	Cap
Front
Caster

DETAIL “B”

Walking

Beam

Headtube

Cap

Front

Caster

DETAIL “C”

Pinch

Point

FIGURE 3.4 Pinch Points

Part No 1143190 25 TDX™ SP