Troubleshooting

Fills with the Wrong

Turn both faucets on fully.

Temperature Water

If equipped with a temperature selector knob, be sure it is set directly on a

 

 

temperature setting and not between settings.

 

Make sure temperature selection is correct.

 

If Auto Temperature Control (select models) is selected, cold water may feel warmer

 

 

than cold water from the tap. (See page 7-8).

 

Make sure hoses are connected to correct faucets and inlet connections. Be sure

 

 

water supply is regulated correctly. Flush water line before filling washer.

 

Check the water heater. It should be set to deliver a minimum 120° F (49° C) hot

 

 

water at the tap. Also check water heater capacity and recovery rate.

 

Disconnect hoses and clean screens. Hose filter screens may be plugged.

 

 

 

Cycle Selector

Extra Rinse (select models) is selected.

Advances Through Off

 

 

 

 

 

For further assistance contact Maytag ServicesSM, Maytag Customer Assistance:

U.S. 1-800-688-9900 or Canada 1-800-688-2002.

U.S. Customers using TTY for deaf, hearing impaired or speech impaired, call 1-800-688-2080.

14

Page 15
Image 15
Maytag PAVT-1 warranty Troubleshooting