Maytag PAVT-1 warranty Regular Cycle, Wrinkle Free Fabrics/Delicates Cycles

Using the Controls – Speed Select Models

STEP 5

Select Cycle

To select a cycle, push the control dial IN and turn it to the right (clockwise) until the pointer is at the soil level needed for the wash load.

Regular Cycle

Regular Cycle is used for normal, sturdy fabrics and uses the following settings:

PREWASH (select models): approximately 16 minutes of wash time.

EXTRA HEAVY: approximately 13 minutes of wash time.

HEAVY: approximately 11 minutes of wash time.

NORMAL: approximately 8 minutes of wash time.

LIGHT: approximately 6 minutes of wash time.

Wrinkle Free Fabrics/Delicates Cycles

Wrinkle Free Fabrics/Delicates Cycles share the same portion of the control dial. For wrinkle free fabrics, select the cycle and turn the Wash/Spin Speed dial to Wrinkle Free. For delicate loads, select Delicate Wash/Spin Speed.

PREWASH (select models): approximately 14 minutes of wash time.

HEAVY: approximately 13 minutes of wash time.

NORMAL: approximately 12 minutes of wash time.

LIGHT: approximately 9 minutes of wash time.

HANDWASH (select models): approximately 6 minutes of wash time. Set the Wash/Spin Speed dial to Handwash.

STEP 6

Pull Control Dial Out to Start

You may stop the washer at any time by simply pushing the control dial IN. Therefore it is possible to obtain a non-agitated soak or to shorten, skip or repeat any part of a cycle. The control dial must be pushed IN (off position) when you change the setting.

Note

•Do not attempt to turn the control dial counterclockwise. Damage to the timer will result.

See Laundering Tips for proper washing procedures, stain removal, and special laundering situations.

9