Special Features,

End of Cycle Signal

(select models)

The end of cycle signal will sound once the cycle is completed.

cont.

Unbalanced Spin

Load Compensator

Your new washer is designed to handle out-of-balance loads without shutting down or interrupting the washing cycle.

For this reason, the cycle will always be completed. If heavier fabrics in such out-of-balance loads should ever contain excessive moisture at the completion of the cycle, redistribute the clothes in the washer and reset the control dial for the final spin period.

Automatic Lint Filtering System

The Lint Filtering System does not require cleaning.

Wash and rinse water is filtered and re-filtered continuously to trap lint shed by most fabrics during the agitation cycle before it can be re-deposited on the wash load. The engineered hole design on the wash basket in conjunction with water flow produced by the agitator, traps lint away from the clothes between the inner wash basket and the outer tub. Lint is automatically flushed from the washer during the spin cycle.

Safety Spin

If for any reason you open the washer lid when the washer is in a spin or extract period, the operation will immediately stop. This is for your personal safety. If your washer does not stop, call your service technician immediately. When the lid is closed, the operation will automatically resume.

Overload Protector

A built-in protector automatically shuts off the washer motor in case of an overload. This can occur if:

The load being washed is too heavy.

Too many appliances are plugged into the line operating your washer.

A low voltage condition exists on the line.

Lid is opened and closed repeatedly.

The overload protector permits the washer to start again when the motor has cooled to a safe operating temperature.

If the motor stops repeatedly, call your service technician.

11

Page 12
Image 12
Maytag PAVT-1 warranty End of Cycle Signal, Unbalanced Spin Load Compensator, Automatic Lint Filtering System, Safety Spin