Elmo DBP SERIES 7.1.4Setting the auxiliary position input format, When using an Optical encoder

85

7.1.4Setting the auxiliary position input format

This step is valid only for those applications that need to use the auxiliary position input. You may skip this step if you do not use it.

When using an Optical encoder

Set DS 7 to OFF

When a the encoder has differential outputs:

Set DS 4 and 5 to OFF

Otherwise they should be ON.

When using Pulse and Direction signals

Set DS 7 to ON

7.1.5Selecting the communication bus

Select the desired communication bus as follows:

For RS232: Set DS9 to OFF

For RS485: Set DS9 to ON

7.1.6Preparing the automatic baud rate selection

The DCB baud rate will automatically match the host baud rate when DS1 is set to ON.

Set DS1 to ON

DBP - Rev 6/93