Oreck RORB600 Maintenance & Troubleshooting, Brushes, Sand Screens, User Maintenance, 437057

E N G L I S H

Blue Scrub Pad		437057
(medium aggressive)
•	Used for scrubbing.
•	Cleans tile and concrete.
Brown Strip Pad		437049
(most aggressive)

•Strips linoleum, vinyl, laminate and tile floors.

•Cleans and scrubs tile and grout.

•Can be used on commercial vinyl.

•Use on smooth concrete.

•Use with Sand Screens.

•Scrubs and cleans wood decks.

Beige Marble Pad 437058

(marble only)

• For restoring and cleaning marble floors.

To use a floor pad, see “Attaching Accessories” on page 4 and “Removing Accessories” on page 5.

Brushes

Brushes are designed to get into grooves and recesses on non-flat surfaces. Brushes lift and remove ground-in dirt and grime.

Brushes are coded depending on how aggressive they are with the black carpet brush being the least

aggressive, followed by the tan polish brush (union mix) and the orange scrub brush the most aggressive.

Black Carpet Brush	237049
(least aggressive)

•Use with Oreck Dry Shampoo.

•Safe, soft action needed for carpet cleaning.

•Use on textured linoleum.

•Use for cleaning delicate or glazed ceramic or porcelain tile.

Tan Polish Brush (Union Mix)	237048
(medium aggressive)

•Use to polish wood floors.

•Will “blend” in excess floor wax, maintain an even coat of wax and eliminate wax build-up.

•Use for getting inside cracks of a wood floor.

•Use to polish waxed wood floors.

•Use for marble, stone, and delicate tile floors

Orange Scrub Brush	237047
(most aggressive)

•Used to clean ceramic tile or concrete and many tough stains.

To use a brush, see “Attaching Accessories” on page 4 and “Removing Accessories” on page 5.

Sand Screens

Sand screens offer the very best in floor sanding. For all sand screens, place the black drive pad holder on Orbiter® Multi-Floor Machine. Then place the sand screen under any floor pad on floor and center Orbiter® Multi- Floor Machine onto the pad.

60 grit	SS12060
80 grit	SS12080
100 grit	SS12100

For Questions or Information about Oreck’s Line of Cleaning Products, Please Call or Visit Your Local Oreck Dealer.

RESIDENTIAL

USA: 1-800-989-3535

Canada: 1-888-676-7325

www.oreck.com

COMMERCIAL

Commercial: 1-800-242-1378

www.oreckcommercial.com

Maintenance &

Troubleshooting

Care of Your Oreck®

Multi-Floor Machine

This is a precision machine. Dropping, unreasonable bumping or rough handling may result in damage to the balanced counter-weight system. Wrap your cord loosely around the two hooks on the handle. Remove brushes after use. The bristles may be damaged due to the weight of the machine. Store your machine in the upright position. After each use, remove wax or cleaning solutions from the unit. After sanding, blow sawdust off motor. Clean housing and bumper with damp cloth after each use. A little care will keep your Orbiter® looking like new.

User Maintenance

The Orbiter® motor bearings are factory lubricated and sealed. All other servicing should be performed by an authorized service center. There are no user serviceable parts inside.

11