TROUBLE SHOOTING SCHEDULE

Problem

Procedure

 

 

 

Engine will not start.

Fuel tank empty.

 

Plug defective.

 

Plug connection defective.

 

• Dirt in carburettor or fuel pipe.

 

 

 

Starter does not pull round engine.

Battery flat.

 

• Bad contact between cable and battery terminal.

 

• Lift lever for cutting unit in wrong position.

 

• Main fuse blown. The fuse is placed in front of the

 

 

battery, under the battery cover.

 

Ignition lock faulty.

 

• Gear shift/hydrostat pedal not in neutral.

 

 

 

Engine does not run smoothly.

Wrong gear, too high.

 

Carburettor incorrectly set.

 

Air filter clogged.

 

• Fuel tank vent blocked.

 

Ignition setting defective.

 

• Dirt in fuel pipe.

 

• Choke activated or throttle wire incorrectly adjusted

 

 

 

Engine seems to have no power.

Air filter clogged.

 

Plug defective.

 

• Dirt in carburettor or fuel pipe.

 

Carburettor incorrectly set.

 

• Choke activated or throttle wire incorrectly adjusted

 

 

 

Engine overheats.

Engine overloaded.

 

• Air intake or cooling flanges blocked.

 

Fan damaged.

 

• Too little or no oil in engine.

 

Ignition defective.

 

Plug defective.

 

 

 

Battery does not charge.

One or more cells faulty.

 

• Bad contact between battery terminals and cables.

 

 

 

Machine vibrates.

Blades are loose.

 

Engine is loose.

 

• Imbalance on one or more blades, resulting from

 

 

damage or inferior balancing after sharpening.

 

 

 

Uneven mowing.

Blades blunt.

 

Cutting unit skew.

 

• Long or wet grass.

 

• Grass blockage under hood.

 

• Different tyre pressures on right and left sides.

 

Over-speeding.

 

Drive belts slipping.

 

• The blade has a broken break-pin (BioClip)

38 – English

Page 39
Image 39
Husqvarna 11 Bio, 39765, 13 Bio manual Trouble Shooting Schedule, Problem Procedure