Husqvarna Driving the machine, For Rider 13 and Rider 13 Bio, For Rider 11 and Rider 11 Bio

DRIVING

7.When the engine has started release the ignition key to neutral position.

Push the throttle control to the required speed. For cutting 3/4 to full throttle.

WARNING!

Never run the engine indoors, in enclosed or poorly ventilated areas. The exhaust fumes contain toxic carbon monoxide.

STOP START

Driving the machine

1.Release the parking brake by pressing down the brake pedal.

2.For Rider 13 and Rider 13 Bio

Carefully press down one of the pedals until the correct speed is reached.

To drive forwards: press down pedal (1).

To reverse: press down pedal (2).

For Rider 11 and Rider 11 Bio

Press the clutch and engage the required gear. To engage reverse gear the lock button must be pressed down.

•Gears 1–4 are used for mowing.

•Gears 4–5 are used for transport.

Starting is possible irrespective of which gear is engaged.

IMPORTANT INFORMATION

Do not change gear from forward drive to reverse while the machine is moving.

The clutch must be used for each gear change.

Stop the machine before changing for forward drive to reverse, otherwise the gearbox can be damaged.

Never use force to engage a gear. If a gear will not engage directly release and push down the clutch again, and then try to engage the gear again.

16 – English

Rider 13

2 1

Rider 13

N

Rider 11