Fujitsu MAA3182, MAC3045, MAB3045, MAB3091, MAC3091 manual Specification

2.2SCSI Function Specifications

Table 2.3 shows the SCSI functions provided with the IDD.

See Appendix E for the SCSI interface functions provided for the IDD. Refer to the OEM Manual –SCSI Physical Specifications–, for details or specifications.

Table 2.3 SCSI function specifications

		Item		Specification
	Single-ended type				Ο
	Differential type				×
Electrical
	Single-ended type		Position where the terminating		Ο
requirements			resistor is mounted on the PCA
	Differential type		Position where the terminating		×
			resistor is mounted on the PCA
	TERMPWR signal send/receive function				Ο
Connector	Non-shielded type (50 mil pitch): 16-bit SCSI				Ο
	Shielded type				×
Data bus parity					Ο
Bus arbitration function					Ο
Disconnection/reconnection function					Ο
	SCSI ID	8-bit SCSI			#0 to #7
				(Jumper selection)
Addressing		16-bit SCSI			#0 to #15
				(Jumper selection)
	LUN (logical unit number)				#0 fixed
	Asynchronous mode		8-bit SCSI	Ο 6 MB/s max.
Data transfer			16-bit SCSI	Ο 12 MB/s max.
	Synchronous mode		8-bit SCSI	Ο 20 MB/s max.
			16-bit SCSI	Ο 40 MB/s max.
Data buffer				512-KB programmable segment
				buffer (1 to 16)
Data block length (Logical data length=Physical data length)				512 to 528 bytes
				(Fixed length)
			Ο : Provided		× : Not provided

C141-E035-03EN 2 - 7