![](/images/new-backgrounds/1142197/14219759x1.webp)
(*1) The formatted capacity can be changed by changing the logical block length and using spare sector space. See Chapter 3 for the further information.
(*2) The number of user cylinders indicates the max., and includes the alternate cylinder. The
number of user cylinders and alternate cylinders can be specified at format of the IDD.
(*3) The positioning time is as follows:
2000 4000 6000 8000 10000 ![](/images/new-backgrounds/1142197/14219759xi2.webp)
![](/images/new-backgrounds/1142197/14219759xi3.webp)
![](/images/new-backgrounds/1142197/14219759xi4.webp)
![](/images/new-backgrounds/1142197/14219759xi5.webp)
2000 4000 6000 8000 10000
MAA31xxxx |
| MAB30xxxx/MAC30xxxx |
|
|
|
(*4) The start time is the time from power on or start command to when the IDD is ready, and stop time is the time for disks to completely stop from power off or stop command.
(*5) This value indicates at ready mode.
(*6) Up to 4 SCSI devices having capacitance of 25pF or less can use cable length of up to 3.0 m.
(*7) 5 to 8 SCSI devices having capacitance of 25pF or less can use cable length of up to 1.5 m.
(*8) The maximum data transfer rate may be restricted to the response speed of initiator and by transmission characteristics.
(*9) The terminator power pin (SCSI connector) which supplies power to other terminators is not used.
2 - 3 |