Fujitsu MAB3045, MAC3045, MAB3091, MAC3091, MAA3182 manual 17 16-bit Scsi interface connector

(2)SCSI connector and power supply connector

a.16-bit SCSI

The connector for the SCSI bus is an unshielded P connector conforming to SCSI-3 type which has two 34-pin rows spaced 1.27 mm (0.05 inch) apart. Figure 4.17 shows the SCSI connector. See Section C3 in Appendix C for the signal assignments on the SCSI connector.

For details on the physical/electrical requirements of the interface signals, refer to Sections 1.3 and 1.4 in the SCSI Physical Interface Specifications.

Thetolerance is ±0.127 mm(0.005 inch)unless otherwise

Figure 4.17 16-bit SCSI interface connector

b.Power supply connector

Figure 4.18 shows the shape and the terminal arrangement of the output connector of DC power supply.

C141-E035-02EN 4 - 15