Fujitsu MAC3091, MAC3045, MAB3045, MAB3091, MAA3182 manual Disclaimer, Model names

DISCLAIMER

Failure of the MAA31xxxx, MAB30xxxx and MAC30xxxx series intelligent disk drive is defined as a failure requiring adjustments, repairs, or replacement. Fujitsu is not responsible for drive failures caused by misuse by the user, poor environmental conditions, power trouble, host problems, cable failures, or any failure not caused by the drive itself.

The suffix of the model name of the disk drive varies depending on the electrical requirements, capacity, and data format at factory shipment of the SCSI, i.e., the interface for connecting the three device types or host system and the disk drives (Note 1). However, in this manual, the typical model names (Note 2) are used unless otherwise noted. These disk drives may be called intelligent disk drives (IDD), drives, or devices in this manual.

Note 1: Model names

M AA 3 182 SC

Interface types	SP: Single-Ended, 16-bit SCSI
	SC: Single-Ended, 16-bit SCSI SCA2 connector
Formatted capacity (100 MB units)
Disk size	3: 3.5 inch
Type	AA: 1.6-inch height (7,200rpm)
	AB: 1-inch height (7,200rpm)
	AC: 1-inch height (10,033rpm)

Note 2:	Type model name
	Type model	Model name
	name
	MAA3182	MAA3182SP, MAA3182SC
	MAB3091	MAB3091SP, MAB3091SC
	MAB3045	MAB3045SP, MAB3045SC
	MAC3091	MAC3091SP, MAC3091SC
	MAC3045	MAC3045SP, MAC3045SC

C141-E035-03EN vii