Fujitsu MAA3182, MAC3045, MAB3045, MAB3091, MAC3091 manual 25 SCA2 type Scsi connector

(2)SCSI connector and power supply connector

a.SCA type SCSI

The connector for the SCSI bus is an unshielded SCA-2 connector conforming to SCSI-3 type which has two 40-pin rows spaced 1.27 mm (0.05 inch) apart. Figure 4.25 shows the SCSI connector. See Section C.5 in Appendix C for signal assignments on the connector.

For details on the physical/electrical requirements of the interface signals, refer to Sections 1.3 and 1.4 in SCSI Physical Interface Specifications.

ESD contact

Figure 4.25 SCA2 type SCSI connector

C141-E035-03EN 4 - 23