Fujitsu MAB3045, MAC3045, MAB3091, MAC3091, MAA3182 manual Installation

4.3	Connection Requirements	4-14
4.3.1	Single-ended 16-bit SCSI model (MAA31xxSP, MAB30xxSP, MAC30xxSP)	4-14
4.3.2	SCA2 type SCSI model (MAA31xxSC, MAB30xxSC, MAC30xxSC)	4-22
4.3.3	Cable connector requirements	4-24
4.3.4	External operator panel	4-28
CHAPTER 5 INSTALLATION		5-1
5.1	Notes on Handling Drives	5-1
5.2	Connections	5-3
5.3	Setting Terminals	5-5
5.3.1	SCSI ID setting	5-7
5.3.2	Each mode setting	5-8
5.3.3	Write protect, terminating resistor setting	5-9
5.3.4	Mode settings	5-10
5.4	Mounting Drives	5-11
5.4.1	Check before mounting	5-11
5.4.2	Mounting procedures	5-11
5.5	Connecting Cables	5-12
5.6	Confirming Operations after Installation and Preparation for use	5-13
5.6.1	Confirming initial operations	5-13
5.6.2	Checking SCSI connection	5-15
5.6.3	Formatting	5-18
5.6.4	Setting parameters	5-20
5.7	Dismounting Drives	5-24
CHAPTER 6 DIAGNOSTICS AND MAINTENANCE		6-1
6.1	Diagnostics	6-1
6.1.1	Self-diagnostics	6-1
6.1.2	Test programs	6-4
6.2	Maintenance Information	6-5
6.2.1	Maintenance requirements	6-5
6.2.2	Revision numbers	6-7
APPENDIX A LOCATIONS OF CONNECTORS, SETTING TERMINALS, AND
	TERMINATING RESISTORS	A-1

x C141-E035-03EN