Instructions for the installer
7. ADAPTATION TO DIFFERENT TYPES OF GAS
Before carrying out the following operations, disconnect the appliance from the power supply.
The appliance is preset for natural gas G20 (2H) at a pressure of 20 mbar. In the case of operation with other types of gas, the burner nozzles must be changed and the minimum flame adjusted on the gas taps. To change the nozzles, proceed as described in the following paragraphs.
7.1Replacement of the cooking hob nozzles
1Extract the pan racks and remove all the caps and
2Unscrew the burner nozzles with a 7 mm socket spanner;
3Proceed with the replacement of the burner nozzles according to the gas to be used (see paragraph “7.2 Burner and nozzle characteristics table”);
4Replace the burners in the correct position.
The nozzles for using city gas (G110 – 8 mbar) are available from authorised service centres.
36
