
•Job Tracking Log — list of the last ten print jobs, with diagnostic information.
•Media Tracking Log — the amount of sheet fed and roll fed media printed since the reset button on this screen was pressed.
3.Ink levels — numeric and graphic ink levels; line marks “low ink” level. Press here to display detailed ink status.
4.UV lamps status (R=right side, L=left side) — black=off, yellow=on, blinking=warming up. Press here for detailed lamp status and controls. Whenever the UV lamps are warming up or cooling down, the time remaining until they are finished is displayed. The lamp icons also indicate the position of the shutter aperture (see page
5.Media Present indicator — a green icon means media is present, red means that media is not present, and gray means that the sensor is disabled.
6.Cover — open or closed.
7.Langauge selector — if installed, switches the control panel language from English to an alternate language.
8.Print prime bars — fires all jets by drawing a set of lines called prime bars. This is a good way to inspect and prepare the jets for printing after they have been idle (see “Print Prime Bars” on page
9.Purge printheads — purges the printheads to help recover missing jets.
10.Print mode — sets print quality mode. See “Configure Print- ing” on page
11.Calibrate — displays the Calibrate Printer menu.
12.Settings — displays the Printer Settings menu.
13.Tools — displays the Tools menu.
14.Move media forward/backward — press the ) key to advance the media forward. When you press and hold the )
Front Page |