After briefly displaying the measured width of the media, the control panel displays the media and margin measurements (see Fig.
•To change the margins, press the Margin Settings key.
Note The minimum Trailing Margin is 6 inches (15.2 cm), to enable the pinch rollers to advance the media.
Fig. 2-6. Rigid sheet measurements
14.Press the ! (Proceed) key.
The control panel displays the message, “Media loaded suc- cessfully,” and asks whether to save the Media Feed Num- ber (MFN) for the current media type.
•To load the new MFN, press the 9 (Yes) key.
•To discard the new MFN and used the
•To perform a media feed calibration or enter a different MFN, press the Calibrate Media Feed key (For instructions, see “Media Feed Calibration” on page
The Front Page screen appears.
15.Press the Go Online key.
Load and Print on Rigid Media |
