The printer prints a jet map test pattern.
Fig. 4-5. Sample jet mapping pattern (Head 1 shown)
If a line segment is missing or broken, the jet number shown next to it is out. A code letter if present provides further infor- mation:
R — no replacement
S — user disqualified “soft” jetout
H — user disqualified “hard” jetout
D — disqualified (and replaced) by AutoJet
A “soft” bad jet is a jet that you believe is temporarily out, based on past performance. A “hard” bad jet is a jet that you believe is permanently out.
3.When the calibration pattern has printed, the control panel displays a menu with the following options:
•Report individual soft bad jets — enables you to report a “soft” bad jet, which can be automatically reenabled if AutoJet finds it working.
Manual Calibrations |
