Load and Print on Roll-Fed Media
1.If opened, retract the rigid media input and output table extensions, and fold the table legs, tables, and adjustable media fence down into their storage positions.
Fig. 2-7. Tables stored for roll-fed printing
2.Load the media onto the supply spool.
Remove the removeable collet from the spool, load the roll of media onto the spool, and replace the collet. You can print on either side of the media by loading the spool with the media feeding off the top or bottom of the roll.
Tip | To prevent fingerprints from showing on printed out- |
| put, wear gloves while handling the media. |
|
|
Pin
Removeable collet 
Fixed collet
Fig. 2-8. Media spool
Load and Print on |
