key, the media moves faster. Press the , key to reverse the media back onto the supply spool. When you press and hold the , key, the media moves faster. (The same functionality is provided by the media advance switch on the back of the printer.)

15.Go Online/Go Offline switch — switches network communi- cations on and off between the printer and RIP.

16.Sleep/Wake — Sleep Mode powers down the UV lamps, printheads, carriage, and media drive motors, but maintains vacuum to the printheads to prevent ink leakage. The printer automatically enters Sleep Mode at the interval set in the Printer Settings menu (see page 3-11). If the printer is awake, the Sleep key displays so you can switch the printer into Sleep mode. If the printer is asleep, press the Wake key, or any other key, to “wake” the printer for operation.

17.Advance Media Past Brushes — advances roll-fed media forward for trimming, then retracts the media back to printing position.

18.Load (visible when media is not loaded) — loads media. See “Load and Print on Rigid Media” on page 2-10and “Load and Print on Roll-Fed Media” on page 2-15for instructions.

19.Unload (visible when media is loaded) — raises the pinch rollers so you can unload the media. The load/unload func- tionality is also provided by the load/unload switch on the back of the printer.

20.Attention messages — blinks on the control panel when the printer detects an error condition, potential error condition, or when you make a change that requires recalibration or other action to ensure best print quality. See “Overview” on page 3-2for more information.

Front Page

3-5