using the knife sharpener
1With the can opener sideways on, place the knife into one of the recesses.
2Press the lever down and gradually draw it towards yourself. Then place the knife in the other recess and repeat. Take care not to allow the knife to cut into the body of the can opener.
3Repeat this cycle several times in order to sharpen the knife satisfactorily.
4The grinding wheel may jam if too much pressure is applied on the knife. Lift the knife slightly to release the wheel.
NOTE: Knives without a serrated edge, preferably carbon steel are most suitable for sharpening.
care and cleaning
●Disconnect the appliance by switching off and removing the plug from the power supply.
●Lift the lever fully and withdraw the assembly from the can opener.
●Wash the lever in hot sudsy water and dry thoroughly. Dishwashing is not advised.
●Replace the lever in the body
●Wipe over the body with a damp cloth and dry thoroughly.
service & customer care
●If the cord is damaged it must, for safety reasons, be replaced by KENWOOD or an authorised KENWOOD repairer.
If you need help with:
●using your can opener or
●servicing or repairs (in or out of guarantee)
call Kenwood customer care on
023 9239 2333. Have your model number ready - it's on the underside of your can opener.
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.
At the end of its working life, the product must not be disposed of as urban waste.
It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service.
Disposing of a household appliance separately avoids possible negative consequences for the environment and health deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy and resources. As a reminder of the need to dispose of household appliances separately, the product is marked with a
guarantee (UK only)
If your can opener goes wrong within one year from the date you bought it, we will repair or replace it free of charge provided:
●you have not misused, neglected or damaged it;
●it has not been modified (unless by Kenwood);
●it is not
●it has not been used commercially;
●you have not fitted a plug incorrectly; and
●you supply your receipt to show when you bought it.
This guarantee does not affect your statutory rights.
●spares and attachments
call 0870 2413653. other countries
●Contact the shop where you bought your can opener.
●Designed and engineered by Kenwood in the UK.
●Made in China.
Head Office Address: | CO606 |
| |
Kenwood Limited, New Lane, Havant, Hampshire PO9 2NH, UK | |
www.kenwoodworld.com |
|
Designed and engineered by Kenwood in the UK |
|
Made in China | 85576/7 |
