Manuals / Linksys / Computer Equipment / Switch

Linksys SLM224G4S manual Admin Firmware Upgrade, Admin Reboot, Admin Factory Default, Chapter

Models: SLM224G4S

1 77

Download 77 pages 37.8 Kb

Page 52

Admin > Firmware Upgrade

Chapter 5

Configuration Using the Web-based Utility

Admin > Firmware Upgrade

Admin > Firmware Upgrade

The Firmware Upgrade screen allows you to download firmware upgrade files from a TFTP server, or from your computer via the HTTP interface.

Via TFTP Select this to download from or upload to a TFTP server. When you select this option, the following fields are displayed.

•UPGRADE Select this option to upgrade the switch from a file located on a TFTP server.

•File Type Select the type of file to download, either Software Image or Boot Code.

•TFTP Server Enter the TFTP Server IP Address that contains the source file to upgrade from.

•File Name Enter the name of the upgrade file on the TFTP Server.

•BACKUP To back up the firmware to a TFTP server, enter the TFTP server address.

•TFTP Server Enter the TFTP Server IP Address to which the firmware file will be saved.

•File Name Displays the name of the firmware file. This field cannot be edited.

Via HTTP Select this to download an upgrade file using the HTTP interface. When you select this option, the following field is displayed:

•Source File Enter the name and path of the file or click Browse to locate the upgrade file.

Click Save Settings to begin the download or upload.

Admin > Reboot

The Reboot screen is used to reset one Switch or the entire stack. From the drop-down menu, select the unit number or Stack, then click Reboot, then click OK to confirm. The configuration settings are automatically saved before the system reboots.

Admin > Reboot

Admin > Factory Default

The Factory Default screen allows network managers to reset the Switch to the factory defaults shipped with the switch. This results in erasing the configuration file.

NOTE: Restoring factory defaults erases all current configuration settings. You can save a copy of your configuration settings beforehand using the Admin > Save Configuration screen.

Admin > Factory Default

24/48-Port 10/100 + 4-Port Gigabit Resilient Clustering Smart Switch with 2 Combo SFPs

46

Image 52

Linksys SLM224G4S manual Admin Firmware Upgrade, Admin Reboot, Admin Factory Default, Chapter

Contents

24-Port or 48-Port 10/100 + USER GUIDEBUSINESS SERIES Model SLM224G4S, SLM248G4SAbout This Guide About This GuideIcon Descriptions Online ResourcesTable of Contents Chapter 3 InstallationChapter 1 Introduction Chapter 2 Product OverviewTable of Contents Setup Network SettingsAppendix B About Switch Stacking Appendix C GlossaryAppendix A About Gigabit Ethernet and Fiber Optic Cabling Table of ContentsAppendix D Specifications Appendix E Warranty InformationAppendix G Contact Information Appendix F Regulatory InformationIntroduction ChapterChapter 1 Introduction Chapter Product Overview Product OverviewSLM224G4S Front PanelSLM248G4S Product OverviewGigabit Port ChapterChapter Installation InstallationPre-Installation Considerations Placement OptionsHardware Installation Desktop PlacementRack-Mount Placement InstallationUplinking the Switch Configuring Stacking ModeSwitch Port Shared withReplacing a Stacked Switch 2. Go to the Setup Stack Configuration screenReassigning a Slave Unit as the Master Unit InstallationChapter Configuration Using the Console Interface Using the HyperTerminal ApplicationUsing telnet InstallationHow to Use the Console Interface LoginSwitch Main Menu System Configuration MenuManagement Settings User & Password SettingsSerial Port Configuration System InformationSecurity Settings IP ConfigurationIP Address Settings HTTPNetwork Configuration File ManagementInstallation ChapterRestore System Default Settings Reboot SystemStack Configuration InstallationPort Configuration Port StatusSystem Mode HelpChapter Configuration Using the Web-based Utility SetupSetup Summary Device InformationSetup Zoom Setup Network SettingsConfiguration Using the Web-based Utility Settings screenSetup Time Configuration Using the Web-based UtilityIdentification Local TimeSetup Stack Management Port Management Port SettingsPort Management SNTP ServersConfiguration Using the Web-based Utility Port ConfigurationChapter LAG Configuration Port Management Link AggregationConfiguration Using the Web-based Utility ChapterPort Management LACP Global ParameterPort Priority Configuration Using the Web-based UtilityVLAN Management Port Settings VLAN ManagementVLAN Management Create VLAN LACP Port TableVLAN Management Port to VLAN VLAN Management VLAN to PortJoin VLAN to Port Configuration Using the Web-based UtilityStatistics Statistics RMON StatisticsConfiguration Using the Web-based Utility ChapterStatistics RMON History RMON HistoryLog Table RMON History TableStatistics RMON Alarms Add AlarmConfiguration Using the Web-based Utility ChapterAlarm Table Statistics Port UtilizationStatistics RMON Events Statistics Interface StatisticsSecurity 802.1x Settings SecurityInterface Ethernet-likeSetting Timer Security Port SecurityConfiguration Using the Web-based Utility ChapterSecurity Management Access List Web IP FilteringConfiguration Using the Web-based Utility ChapterSecurity Storm Control Security RADIUSConfiguration Using the Web-based Utility ChapterQoS CoS Settings CoS SettingsCoS Default Configuration Using the Web-based UtilityQoS Queue Settings QoS DSCP SettingsQoS Bandwidth Configuration Using the Web-based UtilitySpanning Tree QoS Basic ModeSpanning Tree STP Status Configuration Using the Web-based UtilitySpanning Tree STP Port Settings Global SettingBridge Settings Spanning Tree Global STPVLAN IGMP Settings MulticastMulticast IGMP Snooping IGMP GlobalMulticast Bridge Multicast Multicast Bridge Multicast Forward AllConfiguration Using the Web-based Utility ChapterSNMP SNMP Global ParametersSNMP Views The Bridge Multicast Forward All screen contains the following fieldsSNMP Group Profile SNMP Group MembershipConfiguration Using the Web-based Utility ChapterConfiguration Using the Web-based Utility SNMP CommunitiesChapter SNMP Notification Filter SNMP Notification RecipientBase Table Advanced TableAdmin Admin User AuthenticationUser Authentication Change a passwordAdmin Static Address Admin Dynamic AddressChange a user name Delete a user nameAdmin Port Mirroring Admin Cable TestQuery Configuration Using the Web-based UtilityConfiguration Using the Web-based Utility Admin Save ConfigurationChapter Admin Firmware Upgrade Admin RebootAdmin Factory Default Configuration Using the Web-based UtilityAdmin Logging Admin Server LogsAdmin Memory Logs Configuration Using the Web-based UtilityAdmin Flash Logs LogoutConfiguration Using the Web-based Utility ChapterAppendix A Appendix A About Gigabit Ethernet and Fiber Optic CablingGigabit Ethernet Fiber Optic CablingAppendix B About Switch Stacking About Switch StackingAppendix B Stack Building Quick StartAbout Switch Stacking Advanced StackingStack Resiliency Unit IDsStack Units Startup Process Master DiscoveryMaster Election About Switch StackingUnit and Port Configuration User ControlsStacking Examples Replacing a Failed Stack Member in a Running StackAbout Switch Stacking Stack Master Failure and ReplacementAppendix B Splitting a Stack About Switch StackingSubgroup Contains Both Master Unit and Backup Master Unit Subgroup Contains Either Master Unit or Backup Master UnitSubgroup Contains Neither Master Unit nor Backup Master Unit Merging Two StacksBoth Stacks Kept Running During Insertion About Switch StackingStacking Cable Failure Inserting Too Many UnitsStandalone Unit Inserted into a Running Stack About Switch StackingAppendix C Glossary Appendix CGlossary Glossary Appendix CGlossary Appendix CMDI Media Dependent Interface A cable used for end stations Glossary Appendix CWAN Wide Area Network Networks that cover a large geographical area Appendix D Specifications SpecificationsSpecifications Security FeaturesSpecifications LayerStandards EnvironmentalAppendix E Warranty Information Warranty InformationLimited Warranty Obtaining Warranty ServiceTechnical Support Warranty InformationAppendix E Safety Notices Appendix FAppendix F Regulatory Information Regulatory InformationRegulatory Information Appendix FRegulatory Information Appendix FLa direttiva europea 2002/96/EC richiede che le apparecchiature Regulatory Information Appendix FNederlands Dutch - Milieu-informatie voor klanten in de Europese Unie Appendix F Regulatory InformationSlovenčina Slovene - Okoljske informacije za stranke v Evropski uniji Suomi Finnish - Ympäristöä koskevia tietoja EU- alueen asiakkailleAppendix G Appendix G Contact InformationContact Information Linksys Contact Information