Motorola CPCI-6115 manual PMC I/O Module, Port Configuration Diagrams, 108

Transition Module Preparation and Installation PMC I/O Module

5.7.6.4Port Configuration Diagrams

The following interface configuration diagrams describe the interface between the CPCI-6115 SBC and the CPCI-6115-MCPTM.

Figure 5-7 CPCI-6115-MCPTM Serial Ports 1 and 2
			CPCI-6115
	RJ45			CPCI-6115-MCPTM-02
	1
	8
	7			PIM 1
COM1	2
(front panel)	5
	4
	3
	6			J6
					COM1
					(rear panel)
		SOUT			4
		SIN			5
		RTS		IO	2
	UART CTS			MUX	7
	0	DTR			8
		DCD			1
		DSR	J5		3
		RI			6
			IO	IO
			MUX	MUX
		RI
		DSR			COM2
					(rear panel)
		DCD			1
	UART DTR				8
				IO	7
	1	CTS
		RTS		MUX	2
		SIN			5
		SOUT			4
					3
				J11	6

PIM 2

5.7.7PMC I/O Module

The CPCI-6115-MCPTM provides additional I/O capabilities for the CPCI-6115 SBC. There are three distinct groups of I/O passed from the CPCI-6115 SBC to the CPCI-6115-MCPTM through the CompactPCI J3 and J5 connectors; MCxx905 SBC host I/O, PMC1 I/O and PMC2 I/O. CPCI-6115 SBC host I/O functions are designed into the CPCI-6115 SBC and their presence or absence is determined when that board is built. This I/O cannot be configured at

108 CPCI-6115 CompactPCI Single Board Computer Installation and Use (6806800A68D)