Motorola CPCI-6115 manual 7 RJ-45 to DB-9 Adapter for COM1 to PC COM1

RJ-45 to DB-9 Adapter for COM1 to PC COM1 Transition Module Preparation and Installation

Table 5-10 COM1, COM2 Connector Pin Assignments (continued)

Pin

5

6

7

8

Signal

RXD

GND

CTS

DTR

5.5.7RJ-45 to DB-9 Adapter for COM1 to PC COM1

The following information is provided for those users wishing to attach a console to an CPCI- 6115 COM1 port for the purpose of terminal emulation.

A prewired, completely shielded RJ-45 to DB-9 female adapter assembly with 8 position RJ-45 socket on one end to DB-9 socket on the other end is available through Motorola. This can be ordered through Motorola by requesting the following part number: MRJ45DB9ADP-01 (works with either a Motorola or Intel CPU).

Connecting an CPCI-6115 to a PC terminal requires that the adapter described above be attached to a standard RJ-45-to-RJ-45 shielded cable with straight through signaling.

The pinout information for this adapter is in the following table:

Table 5-11 Wire Interconnection List RJ-45 to DB-9

RF-45 Signal	RJ-45 Pin	DB-9 Pin	DB-9 Signal
DCD	1	4	DTR
RTS	2	8	CTS
GND	3	5	GND
TxD	4	2	RxD
RxD	5	3	TxD
GND	6	OPEN
CTS	7	7	RTS
DTR	8	6	DSR

CPCI-6115 CompactPCI Single Board Computer Installation and Use (6806800A68D) 101