Motorola CPCI-6115 Host IO Connectors, PMC I/O Module 1 Host I/O Connector Pin Assignments, J10

Transition Module Preparation and Installation PMC I/O Module Connectors

On the host I/O connectors, a PMC I/O module only uses power, ground and the OUT-going serial port pins. A host I/O module could potentially use all pins except the OUT-going serial port.

On the PMC I/O connector, pin meaning is defined entirely by the PMC residing on the host. A host I/O module would not use any pins on this connector.

5.5.2.1Host IO Connectors

Table 5-4 PMC I/O Module 1 - Host I/O Connector Pin Assignments, J10

	Pin		J10		Pin
	1	IN1_DCD		+12 V	2
	3	IN1_RXD		IN1_TXD	4
	5	+5 V		IN1_DTR	6
	7	IN1_DSR		IN1_RTS	8
	9	IN1_CTS		+3.3 V	10
	11	IN1_RI		IN2_DCD	12
	13	GND		IN2_RXD	14
	15	IN2_TXD		IN2_DTR	16
	17	IN2_DSR		GND	18
	19	IN2_RTS		IN2_CTS	20
	21	+5 V		IN2_RI	22
	23	Not Connected		Not Connected	24
	25	Not Connected		+3.3 V	26
	27	Not Connected		Not Connected	28
	29	GND		Not Connected	30
	31	Not Connected		Not Connected	32
	33	Not Connected		GND	34
	35	Not Connected		Not Connected	36
	37	+5 V		Not Connected	38
	39	Not Connected		Not Connected	40
	41	Not Connected		+3.3 V	42
	43	Not Connected		Not Connected	44
	45	GND		Not Connected	46
94		CPCI-6115 CompactPCI Single Board Computer Installation and Use (6806800A68D)