Motorola CPCI-6115 manual CompactPCI User I/O Connector, User I/O Connector Pinout, J3

CompactPCI User I/O ConnectorControls, LEDs, and Connectors

Table 3-5 CompactPCI Connector, J2 (continued)

Pin	Row A	Row B	Row C	Row D	Row E
19	GND	GND	RSV	RSV	RSV
18	BRSVP2A18	BRSVP2B18	BRSVP2C18	GND	BRSVP2E18
17	BRSVP2A17	GND	RSV	RSV	RSV
16	BRSVP2A16	BRSVP2B16	RSV	GND	BRSVP2E16
15	BRSVP2A15	GND	RSV	RSV	RSV
14	AD[35]	AD[34]	AD[33]	GND	AD[32]
13	AD[38]	GND	V(IO)	AD[37]	AD[36]
12	AD[42]	AD[41]	AD[40]	GND	AD[39]
11	AD[45]	GND	V(IO)	AD[44]	AD[43]
10	AD[49]	AD[48]	AD[47]	GND	AD[46]
9	AD[52]	GND	V(IO)	AD[51]	AD[50]
8	AD[56]	AD[55]	AD[54]	GND	AD[53]
7	AD[59]	GND	V(IO)	AD[58]	AD[57]
6	AD[63]	AD[62]	AD[61]	GND	AD[60]
5	C/BE[5]#	64EN#	V(IO)	C/BE[4]#	PAR64
4	V(IO)	BRSVP2B4	C/BE[7]#	GND	C/BE[6]#
3	RSV	GND	RSV	RSV	RSV
2	RSV	RSV	SYSEN#a	RSV	RSV
1	RSV	GND	RSV	RSV	RSV

a. Defined as SYSEN#. This OV allows the CPCI-6115 to ensure that it is installed into a peripheral slot.

3.5.6CompactPCI User I/O Connector

Connector J3 is a 110 pin AMP Z-pack 2mm hard metric type B connector. This connector routes the I/O signals for one of the PMC slots and two 10/100/1000Base-T Ethernet channels compliant with the CompactPCI Packet Switching Backplane Specification. The pin assignments for J3 are as follows:

(Note that outer row F is assigned and used as ground pins but is not shown in the table).

Table 3-6 User I/O Connector Pinout, J3

	Pin	Row A	Row B	Row C	Row D	Row E	Pin
	19	GND	+12 V	-12 V	GND	GND	19
	18	LPa_DA+ (TX1+)	LPa_DA- (TX1-)	GND	LPa_DC+	LPa_DC-	18
	17	LPa_DB+ (RX1+)	LPa_DB- (RX1-)	GND	LPa_DD+	LPa_DD-	17
	16	LPb_DA+ (TX2+)	LPb_DA- (TX1-)	GND	LPb_DC+	LPb_DC-	16
	15	LPb_DB+ (RX2+)	LPb_DB- (RX2-)	GND	LPb_DD+	LPb_DD-	15
CPCI-6115 CompactPCI Single Board Computer Installation and Use (6806800A68D)							55