Motorola CPCI-6115 Environmental, Power, and Thermal Requirements, Environmental Requirements

Hardware Preparation and Installation Environmental, Power, and Thermal Requirements

Shipment Inspection

To inspect the shipment, perform the following steps:

1.Verify that you have received all items of your shipment.

2.Check for damage and report any damage or differences to customer service.

3.Remove the desiccant bag shipped together with the board and dispose of it according to your country’s legislation.

The product is thoroughly inspected before shipment. If any damage occurred during transportation or any items are missing, contact customer service immediately.

2.3Environmental, Power, and Thermal Requirements

The next sections describe the environmental, power, and thermal requirements for the CPCI- 6115.

2.3.1Environmental Requirements

The following table lists the currently available specifications for the environmental and mechanical characteristics of the CPCI-6115. A complete functional description of the CPCI- 6115 baseboard appears in Chapter 4, Functional Description. Specifications for the optional PCI mezzanines can be found in the documentation for those modules.

You must make sure that the board, when operated in your particular system configuration, meets the environmental requirements specified below.

Operating temperatures refer to the temperature of the air circulating around the board and not to the component temperature.

Table 2-1 CPCI-6115 Specifications

	Characteristics	Specifications
	PMC I/O Signal Impedance	42 to 75 ohms (nominal impedance)
	Operating temperature	0°C to +55°C (32°F to 131°F) entry air with forced-air cooling
30	CPCI-6115 CompactPCI Single Board Computer Installation and Use (6806800A68D)